View schema

Schema URL	http://dd.eionet.europa.eu/schemas/WFD2016/SWMET_2016.xsd
File name	SWMET_2016.xsd
Schema set	WFD2016
Name	Surface Water Methodologies Reporting 2016 schema
There are 1 QA scripts and 0 conversion scripts registered for this schema.
Link to the schema page on XMLCONV
<?xml version="1.0" encoding="utf-8"?>
<xs:schema targetNamespace="http://dd.eionet.europa.eu/schemas/WFD2016" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://dd.eionet.europa.eu/schemas/WFD2016" xmlns:wfd="http://dd.eionet.europa.eu/schemas/WFD2016/wfdcommon" xmlns:dc="http://purl.org/dc/elements/1.1/" elementFormDefault="qualified">
	<xs:import namespace="http://dd.eionet.europa.eu/schemas/WFD2016/wfdcommon" schemaLocation="http://dd.eionet.europa.eu/schemas/WFD2016/WFDCommon_2016.xsd"/>
	<xs:complexType name="SWMET">
		<xs:sequence>
			<xs:element name="countryCode" type="wfd:CountryCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Two-letter ISO country code</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="euRBDCode" type="wfd:FeatureUniqueEUCodeType" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Unique EU code of the River Basin District. Prefix the RBD's national, unique code with the Member State's 2-alpha character ISO country code. Quality checks: Element check: First 2 characters must be the Member State's 2-alpha character ISO country code. Cross-schema check: The reported euRBDCode must be consistent with the codes reported in RBDSUCA/RBD/euRBDCode. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWType" type="SWType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Table 7.2.3.2 For each type of surface water body, report the following information</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWMethodologies" type="SWMethodologies" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Table 7.2.3.2 Report the following information on methodologies</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="BQEMethod" type="BQEMethod" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Table 7.3.3.2 Report the following information on assessment methods for BQEs.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWSupportingQE" type="SWSupportingQE" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Table 7.3.3.2 Report the following information on assessment methods for supporting QEs.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWPhysicoChemicalQE" type="SWPhysicoChemicalQE" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Table 7.3.3.2</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWRBSP" type="SWRBSP" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Table 7.3.3.2</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWTargetedQ" type="SWTargetedQ" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Table 7.2.3.2</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWChemicalStatusClassificationRBD" type="SWChemicalStatusClassificationRBD" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Table 7.4.3.2</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWManagementObjectives" type="SWManagementObjectives" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Table 7.5.2.2 SWManagementObjectives</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWPressures" type="SWPressures" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Table 7.6.3.2</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWExemptions" type="SWExemptions" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Table 7.7.3.2</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="SWPrioritySubstance" type="SWPrioritySubstance" minOccurs="1" maxOccurs="unbounded"/>
		</xs:sequence>
		<xs:attribute name="creationDate" use="required" type="wfd:DateType">
			<xs:annotation>
				<xs:documentation>Required. Creation date of the file.</xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="creator" use="required" type="xs:string">
			<xs:annotation>
				<xs:documentation>Required. Creator of the file.</xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="description" use="required" type="xs:string">
			<xs:annotation>
				<xs:documentation>Required. Description of the file. </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="email" use="required" type="xs:string">
			<xs:annotation>
				<xs:documentation>Required. Contact email of data reporter. </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="fileName" use="required" type="xs:string">
			<xs:annotation>
				<xs:documentation>Required. Name of the file. </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="generatedBy" use="required" type="xs:string">
			<xs:annotation>
				<xs:documentation>Required. Name and/or organisation of data reporter. </xs:documentation>
			</xs:annotation>
		</xs:attribute>
		<xs:attribute name="language" use="required" type="wfd:LanguageCode_Enum">
			<xs:annotation>
				<xs:documentation>Required. Code of the language of the file.</xs:documentation>
			</xs:annotation>
		</xs:attribute>
	</xs:complexType>
	<xs:complexType name="SWType">
		<xs:annotation>
			<xs:documentation>For each type of surface water body, report the following information:</xs:documentation>
		</xs:annotation>
		<xs:sequence>
			<xs:element name="swTypeCode" type="wfd:String100Type" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Member State code for the characterisation type of the water body, as reported for each water body in the surface water schema (SWB), and the RBMP and background documents. If typology for HMWBs and/or AWBs has been derived and used it should be reported here. This will allow reporting of e.g. physico-chemical standards linked to these types under the schema SWMET. Details on the typologies are no longer requested but a brief description of the type is required in TypeName and reference to where further details can be found in the RBMP and background documents. In the previous reporting exercise in 2010, some Member States reported more characterisation types than were subsequently reported with surface water bodies. Please ensure consistency in the data reported. Quality assurance checks: Cross-schema check: The reported swTypeCode must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyTypeCode.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swTypeDescription" type="wfd:String1000Type" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Briefly describe the type (e.g. small, lowland, siliceous rivers). Provide a reference to where further details can be found in the RBMP and background documents.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swIntercalibrationType" type="wfd:SWIntercalibrationType_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. If the surface water body type corresponds with an intercalibration type, report the intercalibration type code (not name). The intercalibration type reported in this element must be appropriate to the surface water body's Category. If there is no corresponding intercalibration type, select 'Not applicable'. Quality checks: Cross-schema check: The reported intercalibrationType must be consistent with the codes reported in SWB/SurfaceWaterBody/surfaceWaterBodyIntercalibrationType</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swTypeCategory" type="wfd:SWCategory_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the category of surface water body to which this type refers. 'RW' = River water body. 'LW' = Lake water body. 'TW' = Transitional water body. 'CW' = Coastal water body.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swTypeSpecificReferenceConditionsForBQEs" type="wfd:AllSomeNone_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant BQEs: 'All': Yes, reference conditions have been set for this type for all relevant BQEs 'Some': Partly, reference conditions have been set for this type for some BQEs 'None': No, reference conditions have not been set for this type for any BQEs </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swTypeSpecificReferenceConditionsForHyMoQEs" type="wfd:AllSomeNone_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant physico-chemical QEs: 'All': Yes, reference conditions have been set for this type for all relevant physico-chemical QEs 'Some': Partly, reference conditions have been set for this type for some physico-chemical QEs 'None': No, reference conditions have not been set for this type for any physico-chemical QEs</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swTypeSpecificReferenceConditionsForPhysChemQEs" type="wfd:AllSomeNone_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether type-specific reference conditions have been established for this surface water type for all relevant physico-chemical QEs: 'All': Yes, reference conditions have been set for this type for all relevant physico-chemical QEs 'Some': Partly, reference conditions have been set for this type for some physico-chemical QEs 'None': No, reference conditions have not been set for this type for any physico-chemical QEs</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWMethodologies">
		<xs:sequence>
			<xs:element name="typologyMethodologyReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the typology methodology can be found.  Guidance on what should be included in this document is provided in Section 7.2.3.3. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="smallWBsMethodologyReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where relevant information relating to the methodology for small water bodies can be found. Guidance on what should be included in this document is provided in Section 7.2.3.3.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="minimumCatchmentAreaRivers" type="wfd:NumberDecimalType" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. If defined, state the minimum catchment area in km² for a river to be delineated as a water body in the RBMP. If not defined report -8888. Quality checks: Element check: Report -8888 if a minimum catchment area of rivers has not been defined.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="minimumSurfaceAreaLakes" type="wfd:NumberDecimalType" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. If defined, state the minimum surface area in km² for a lake to be delineated as a water body in the RBMP. If not defined report -8888. Quality checks: Element check: Report -8888 if a minimum surface area of lakes has not been defined.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="otherMinimumCriteria" type="wfd:String1000Type" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Optional. If the minimum criteria used for the delineation of river water bodies is not based on catchment area, or for lake water bodies is not based on surface area, describe the criteria used.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="iRBDTypologyCoOrdinationReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Provide references or hyperlinks to the documents and sections where relevant information relating to the co-ordination of typology methodology in international RBDs can be found. Guidance on what should be included in this document is provided in Section 7.2.3.3. Quality checks: Cross-schema check: Report if RBDSUCA/RBD/internationalRBD is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="hmwbMethodologyReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to the documents and sections where any relevant information relating to the methodology for the designation of AWB and HMWB, can be found. Guidance on what should be included in this document is provided in Section 7.2.3.3.</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="BQEMethod">
		<xs:sequence>
			<xs:element name="bqeMethodName" type="wfd:String250Type" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Provide the name(s) of the assessment method(s) used for this BQE and category. The name(s) must be the same name(s) used in the RBMPs or background documents.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeCode" type="wfd:BQE_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Select the BQE for which the assessment method applies.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeCategoryRW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the assessment method apply to rivers?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeCategoryLW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the assessment method apply to lakes?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeCategoryTW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the assessment method apply to transitional waters?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeCategoryCW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the assessment method apply to coastal waters?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqePercentageOfTypes" type="wfd:NumberDecimal0100Type" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the percentage of types for this BQE and category for which an assessment method is fully developed.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactNutrients" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to nutrient pollution?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactOrganic" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to organic pollution?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactChemical" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to chemical pollution?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactSaline" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to saline pollution?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactAcidification" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to acidification?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactTemperature" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to elevated temperatures?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactHydrological" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to altered habitats due to hydrological changes?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactMorphological" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is the assessment method mainly sensitive to altered habitats due to morphological changes?</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeSensitivityImpactOther" type="wfd:String100Type" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Optional. If relevant, report any other impact to which the assessment method is mainly sensitive that is not covered in the previous questions.</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWSupportingQE">
		<xs:sequence>
			<xs:element name="supportingQECode" type="wfd:SupportingQE_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Select each supporting hydromorphological and physico-chemical QE in turn from the enumeration list and report the information in each of the following schema elements for each supporting QE. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="supportingQECategoryRW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is this supporting QE assessed in terms of ecological status/potential in rivers? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="supportingQECategoryLW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is this supporting QE assessed in terms of ecological status/potential in rivers? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="supportingQECategoryTW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is this supporting QE assessed in terms of ecological status/potential in transitional waters? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="supportingQECategoryCW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Is this supporting QE assessed in terms of ecological status/potential in coastal waters? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="supportingQESensitivityBQE" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the classification boundaries for this supporting QE are related to the class boundaries for the sensitive BQEs.</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWPhysicoChemicalQE">
		<xs:sequence>
			<xs:element name="physChemQECode" type="wfd:PhysChemQE_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Select each physico-chemical QE at the level 4 of aggregation in turn from the enumeration list and report the information in each of the following schema elements for each QE. If the QE for which there is a standard is not included the enumeration list please select the most relevant 'Other' QE and describe in more detail in physChemQEOther. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemQEOther" type="wfd:String100Type" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Report details of the physico-chemical QE for which there is a standard if it is not included the enumeration list in physChemQECode. Quality checks: Conditional check: Report if physChemQECode is  'QE3-1-1-2 Other determinand for transparency', 'QE3-1-2-2 Other determinand for thermal conditions', 'QE3-1-3-3 Other determinand for oxygenation conditions', 'QE3-1-4-2 Other determinand for salinity', 'QE3-1-5-2 Other determinand for acidification status' or 'QE3-1-6-9 Other determinand for nutrient conditions'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemCategoryRW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does this physico-chemical standard apply to rivers? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemCategoryLW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does this physico-chemical standard apply to lakes? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemCategoryTW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does this physico-chemical standard apply to transitional waters? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemCategoryCW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does this physico-chemical standard apply to coastal waters? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemTypeCode" type="wfd:String100Type" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. For each standard, report the Member State code for the characterisation type of the water body, as reported in the surface water characterisation schema (in schema element surfaceWaterBodyTypeCode), and the RBMP and background documents. If the standard applies to all national types, please enter 'All' (in English). More than one type can be added for the same standard value. If the types used in the derivation of physico-chemical standards are different from those used in the assessment of BQEs, please enter the specific national physico-chemical types. If so, please ensure the specific methodology document relating to the derivation of standards (and in particular how it is ensured that all biological types are covered by the standards) is uploaded to WISE or made available on the web. Quality checks: Within-schema check: The reported physChemTypeCode must be consistent with the codes reported in SWMET/SWType/swTypeCode or the entry 'All'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemValue" type="wfd:String20Type" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the value or range of the physico-chemical standard representing the good-moderate boundary only. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemUnit" type="wfd:UnitOfMeasure_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the unit of the physico-chemical standard. If ‘Other’ is selected then provide more information on the unit in physChemUnitOther.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemUnitOther" type="wfd:String50Type" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Report if the unit of the physico-chemical standard is reported as 'Other' in physChemUnit. Quality checks: Conditional check: Report if physChemUnit is 'Other'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemStandardType" type="wfd:PhysChemStandardType_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Select the type of physico-chemical standard applied. 'AA' = Annual Average 'MAC' = Maximum Allowable Concentration '95 %ile' = 95th percentile 'Other' = Other</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemStandardOther" type="wfd:String50Type" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Report if the type of physico-chemical standard applied is reported as ‘Other’ in physChemStandardType. Quality checks: Conditional check: Report if physChemStandardType is 'Other'. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="physChemGMBoundary" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the physico-chemical standard is consistent to the good-moderate status boundary of the relevant sensitive BQEs.</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWRBSP">
		<xs:sequence>
			<xs:element name="rbspCode" type="wfd:RBSP_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Select each River Basin Specific Pollutant (RBSP) with a good-moderate EQS from the enumeration list. If there is more than one standard per substance (e.g. because there are different standards for different categories or matrices), the same RBSP can be introduced more than once.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspOther" type="wfd:String100Type" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional.  If 'rbspCode' is 'Other' please indicate in this field the CAS number (if relevant) and the name of the RBSP. Quality check: Conditional check: report if 'rbspCode' is 'EEA_00-00-0 - Other chemical parameter'.  </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspMatrix" type="wfd:Matrix_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Select the matrix in which the standard for the RBSP is applied for the purpose of assessment of ecological status.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspCategoryRW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the standard apply to rivers? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspCategoryLW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the standard apply to lakes? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspCategoryTW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the standard apply to transitional waters? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspCategoryCW" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Does the standard apply to coastal waters? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspStandardType" type="wfd:EQStandardType_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Select the type of standard applied for each RBSP and matrix. 'AA-EQS' = Annual Average EQS. 'MAC-EQS' = Maximum Allowable Concentration EQS. 'Both' = Both AA and MAC EQS 'Other' = Other type of standard</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspValue" type="wfd:String100Type" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. For every combination of RBSP, matrix, standard type and category, report the value or range of the RBSP standard representing the good-moderate boundary only. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspUnit" type="wfd:UnitOfMeasure_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the unit of the RBSP standard. Quality checks: Element check: Only the options  'ug/L' or 'ug/kg' are a valid selection.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspScale" type="wfd:GeographicalScale_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the geographical scale at which the RBSP standard is applied.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspTechGuidance" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the RBSP standard has been derived in accordance with the 2011 Technical Guidance Document No 27 .</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspAnalyticalMethod" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)  for the strictest standard applied. See Section 7.4.1 on fulfilment of the QA/QC Directive. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="rbspAnalyticalMethodBAT" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4.2 of the QA/QC Directive (2009/90/EC)  for the strictest standard applied.</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWTargetedQ">
		<xs:sequence>
			<xs:element name="oneOutAllOut" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the 'one-out, all-out' principle been applied in deriving the overall classification of the ecological status of a water body.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="groupingExtrapolation" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the grouping of water bodies has been used in extrapolating the assessment and classification of ecological status from monitored water bodies to those water bodies with no monitoring sites. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="gepDefined" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether good ecological potential (GEP) has been defined.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="gepLevel" type="wfd:GEPLevel_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate at what level GEP has been defined.  Quality checks: Conditional check: Report if gepDefined is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="gepApproach" type="wfd:GEPApproach_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Report the approach that has been adopted for defining GEP. Quality checks: Conditional check: Report if gepDefined is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="gepBiology" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate whether GEP has been defined in terms of biology (BQEs). Quality checks: Conditional check: Report if gepDefined is ‘Yes’.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="mitigationMeasures" type="wfd:MitigationMeasure_Enum" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Select the mitigation measures without significant adverse effects on the use or the wider environment from the enumeration list that have been identified to define GEP. More than one mitigation measure may be selected. Quality checks: Conditional check: Report if gepDefined is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bqeForMEPGEP" type="wfd:BQE_Enum" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Select the BQEs from the enumeration list for which biological values were derived to define MEP and GEP. More than one BQE may be selected. Quality checks: Conditional check: Report if gepDefined is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="gesGepComparison" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate whether good ecological status (GES) and GEP have been compared, e.g. measured on a common scale. If 'Yes', provide a document describing the comparison that has been carried out. If 'No', provide a document explaining why a comparison has not been carried out. Provide a reference or hyperlink to the relevant document and section where specific information can be found. This information must be uploaded to WISE or made available on the web. Guidance on the naming of files and documents to be uploaded to WISE is included in the user manual for reporting to WISE (see Annex 6).  If a hyperlink to information stored on a Member State's server is reported, the Member State must guarantee that the hyperlink will remain stable and active for a period of 6 years after reporting, and that the information referred to will not be revised or updated. Quality checks: Conditional check: Report if gepDefined is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="ecologicalStatusMethodReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological status. Guidance on what should be included in this document is provided in Section 7.3.3.3.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="gepMethodReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the methodologies used for the assessment of ecological potential. Guidance on what should be included in this document is provided in Section 7.3.3.3.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="driversFailureEcologicalStatusPotentialReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to technical documents describing the drivers and impacts behind the failures of good ecological status and potential. Guidance on what should be included in this document is provided in Section 7.3.3.3.</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWChemicalStatusClassificationRBD">
		<xs:sequence>
			<xs:element name="percentageSWBNotMonitoredChemical" type="wfd:NumberDecimal0100Type" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the overall percentage of surface water bodies (for all categories) for which there is no monitoring of chemical status.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="approachSWBNotMonitoredChemical" type="wfd:ApproachSWBNotMonitoredChemical_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the approach taken for the assessment of chemical status in surface water bodies which have not been monitored. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="approachSWBNotMonitoredChemicalReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. If the assessment of chemical status of surface water bodies which have not been monitored is derived or extrapolated from monitoring in other comparable surface water bodies, provide references or hyperlinks to technical documents describing how the assessment of chemical status was carried out. Guidance on what should be included in this document is provided in Section 7.4.3.3. Quality checks: Conditional check: Report if approachSWBNotMonitored is 'The status of surface water bodies not monitored for chemical status has been derived or extrapolated from monitoring available for comparable water bodies' or 'Multiple approaches used'. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="limitOfQuantification" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the method of dealing with measurements lower than the limit of quantification is as specified in Article 5 of the QA/QC Directive (2009/90/EC)? </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="backgroundConcentrations" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="backgroundConcentrationsReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. If natural background concentrations for metals and their compounds are taken into consideration where such concentrations prevent compliance with the relevant EQS, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.3. Quality checks: Conditional check: Report if backgroundConcentrations is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bioavailability" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether hardness, pH, dissolved organic carbon or other water quality parameters that affect the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="bioavailabilityReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. If water quality parameters affecting the bioavailability of metals are taken into consideration when assessing monitoring results against relevant EQSs, provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of metals concerned. Guidance on what should be included in this document is provided in Section 7.4.3.3. Quality checks: Conditional check: Report if bioavailability is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="longTermTrendAnalysis" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of the EQS Directive 2008/105/EC that tend to accumulate in sediment and/or biota (Article 3(3) EQSD). </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="longTermTrendAnalysisReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. If arrangements are in place for the long-term trend analysis of concentrations of those Priority Substances listed in Part A of Annex I of the EQS Directive 2008/105/EC that tend to accumulate in sediment and/or biota (Article 3(3) EQSD), provide references or hyperlinks to technical documents where further specific information can be found, particularly the list of Priority Substances concerned. Guidance on what should be included in this document is provided in Section 7.4.3.3. Quality checks: Conditional check: Report if longTermTrendAnalysis is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="mixingZoneDesignation" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether mixing zones have been designated under Article 4 of the EQSD. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="mixingZoneMethodology" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate whether the methodology for the designation of Mixing Zones in the RBD/Sub-unit follows the tiered approach as laid down in the 'Technical Background Document on Identification of Mixing Zones'.  Quality checks: Conditional check: Report if mixingZoneDesignation is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="alternativeMixingZoneMethodologyReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. If the methodology for the designation of Mixing Zones in the RBD/Sub-unit does not follow the tiered approach as laid down in the ’Technical Background Document on Identification of Mixing Zones, provide references or hyperlinks to technical documents describing the alternative methodology applied. Guidance on what should be included in this document is provided in Section 7.4.3.3. Quality checks: Conditional check: Report if mixingZoneMethodology is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="mixingZoneMeasures" type="wfd:MixingZoneMeasures_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate the measures taken with a view to reducing the extent of the Mixing Zones in the future. Quality checks: Conditional check: Report if mixingZoneDesignation is 'Yes' </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="mixingZoneMeasuresReductionReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Provide a references or hyperlinks to documents describing the measures taken with a view to reducing the extent of Mixing Zones in the future. Guidance on what should be included in this document is provided in Section 7.4.3.3. Quality checks: Conditional check: Report if mixingZoneDesignation is ‘Yes’.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="chemicalStatusReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to documents describing the methodology for the assessment of chemical status. Guidance on what should be included in this document is provided in Section 7.4.3.3. </xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWManagementObjectives">
		<xs:sequence>
			<xs:element name="managementObjectivesNutrients" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether overall management objectives have been set for nutrient pollution.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="managementObjectivesNutrientsQuantitativeN" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of nitrogen load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="managementObjectivesNutrientsQuantitativeP" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of phosphorus load reduction. Quality checks: Conditional check: Report if managementObjectivesNutrients is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="managementObjectivesContinuity" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether overall management objectives have been set for river continuity.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="managementObjectivesContinuityQuantitative" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate whether quantitative objectives have been set in terms of river continuity (e.g. km of rivers connected, number of obstacles to be made passable, etc). Quality checks: Conditional check: Report if managementObjectivesContinuity is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="managementObjectivesReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Provide references to the documents and sections where further information on the management objectives can be found. Guidance on what should be included in this document is provided in Section 7.5.2.3. Quality checks: Conditional check: Report if managementObjectivesContinuity or managementObjectivesNutrients is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="waterResourcePlans" type="wfd:YesNoRBMPCode_Union_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether separate Water Resource Plans have been developed in relation to abstractions and e-flows or whether this topic is included in the RBMP. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="waterResourcePlansReference" type="wfd:ReferenceType" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. If there are Water Resource Plans please upload or provide the hyperlinks to the relevant documents. Quality checks: Conditional check: Report if waterResourcePlans is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWPressures">
		<xs:sequence>
			<xs:element name="swPressuresNotAssessed" type="wfd:SignificantPressureType_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Select the pressure types from the enumeration list that have not been assessed (i.e. pressure types that have not been considered because they were not deemed to be important in the RBD, no information was available, or any other reason). If all pressures have been assessed report 'Not applicable'. The option 'No significant pressure' is not valid.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swSignificantPressurePointSourceTools" type="wfd:SignificantPressureTools_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the tools that have been used to define significant pressures from point sources. 'Numerical tools' includes modelling tools.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swSignificantPressureDiffuseSourceTools" type="wfd:SignificantPressureTools_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the tools that have been used to define significant pressures from diffuse sources. 'Numerical tools' includes modelling tools.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swSignificantPressureWaterAbstractionTools" type="wfd:SignificantPressureTools_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the tools that have been used to define significant pressures from water abstractions. 'Numerical tools' includes modelling tools.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swSignificantPressureWaterFlowTools" type="wfd:SignificantPressureTools_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the tools that have been used to define significant pressures from water flow regulation and morphological alterations. 'Numerical tools' includes modelling tools.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swSignificantPressureOtherSourceTools" type="wfd:SignificantPressureTools_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Report the tools that have been used to define significant pressures from other sources. 'Numerical tools' includes modelling tools. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swSignificanceDefinition" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether significance been defined in terms of thresholds. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swSignificanceLinkFailure" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the definition of significance is linked to the potential failure of objectives. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swPressuresReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to the relevant document and section where any other relevant information relating to pressure types can be found. Guidance on what should be included in this document is provided in Section 7.6.3.3. </xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWExemptions">
		<xs:sequence>
			<xs:element name="swExemption44Impact" type="wfd:SignificantImpactType_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Select the impacts from the enumeration list that are causing the application of exemptions under Article 4(4). More than one impact may be selected. If Article 4(4) exemption has not been applied report 'NOTA - Not applicable'. The option 'NOSI - No significant impact' is not valid.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swExemption44Driver" type="wfd:Driver_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Select the drivers from the enumeration list that are causing the application of exemptions under Article 4(4). More than one driver may be selected. If Article 4(4) exemption has not been applied report 'Exemption not applied'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swExemption45Impact" type="wfd:SignificantImpactType_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Select the impacts from the enumeration list that are causing the application of exemptions under Article 4(5). More than one impact may be selected. If Article 4(5) exemption has not been applied report 'NOTA - Not applicable'. The option 'NOSI - No significant impact' is not valid.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swExemption45Driver" type="wfd:Driver_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Select the drivers from the enumeration list that are causing the application of exemptions under Article 4(5). More than one driver may be selected. If Article 4(5) exemption has not been applied report 'Exemption not applied'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swDisproportionateCost" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate if disproportionate costs have been used as a reason for applying exemptions under Article 4(4) or 4(5) for surface water bodies.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swDisproportionateCostScale" type="wfd:GeographicalScale_Enum" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Select the scale at which the calculation of costs was carried out in order to assess disproportionality from the enumeration list. Quality checks: Conditional check: report if swDisproportionateCost is 'Yes'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swDisproportionateCostAnalysis" type="wfd:DisproportionateCostAnalysis_Enum" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Select the analysis tools from the enumeration list that were used in assessing disproportionate cost. More than one analysis tool may be selected. Quality checks: Conditional check: report if swDisproportionateCost is 'Yes'</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swDisproportionateCostAlternativeFinancing" type="wfd:DisproportionateCostAlternativeFinancing_Enum" minOccurs="0" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Conditional. Select the alternative financing options from the enumeration list that have been considered to overcome the costs being disproportionate. More than one financing option may be selected.  Quality checks: Conditional check: report if swDisproportionateCost is 'Yes’.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swDisproportionateCostOtherEULegislation" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Indicate whether the costs of basic measures listed in Article 11(3)(a) of the WFD have been explicitly excluded from the assessment of disproportionate cost. Quality checks: Conditional check: report if swDisproportionateCost is 'Yes'</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swTechnicalInfeasibility" type="wfd:TechnicalInfeasibility_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Report how 'technical infeasibility' has been interpreted in the context of application of exemptions for surface water bodies. Quality checks: Within-schema check: the option 'Technical infeasibility has not been used as a reason for exemption' is not compatible with any other.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swNaturalConditions" type="wfd:SWNaturalConditions_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Report the elements considered when determining that natural conditions require an exemption under Article 4(4) or 4(5). Quality checks: Within-schema check: the option 'Natural condition has not been used as a reason for exemption for surface water bodies' is not compatible with any other.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swExemption46" type="wfd:Exemption46_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether Article 4(6) has been applied and, if so, for what reason. Quality checks: Within-schema check: the option 'Article 4(6) has not been applied' is not compatible with any other.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swExemption47" type="wfd:Exemption47_Enum" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Select the modifications from the enumeration list that have led to the application of the exemption under Article 4(7). More than one modification may be selected.  Quality checks: Within-schema check: the option 'Article 4(7) has not been applied' is not compatible with any other.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swExemptionsTransboundary" type="wfd:YesNoNotApplicable_Union_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the application of exemptions has been co-ordinated in a transboundary context. Report 'Not applicable' if the RBD is not international. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="swExemptionsReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to the relevant documents and sections where specific information on the application of exemptions in surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.3. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="driversSWExemptionsReference" type="wfd:ReferenceType" minOccurs="1" maxOccurs="unbounded">
				<xs:annotation>
					<xs:documentation>Required. Provide references or hyperlinks to the relevant documents and sections where information on the drivers behind exemptions for surface water bodies can be found. Guidance on what should be included in this document is provided in Section 7.7.3.3. </xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:complexType name="SWPrioritySubstance">
		<xs:sequence>
			<xs:element name="psCode" type="wfd:PS_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. There will be one entry per Priority Substance. Report the information in each of the following schema elements for each Priority Substance.  Quality checks: Within-schema check: there should be at least 1 entry per priority substance (except for aldrin, dieldrin, endrin, isodrin and Total PAHs that do not need to be reported here – instead it needs to be reported Total aldrin+dieldrin+endrin+isodrin and individual PAHs in the Annex 1 to the EQS Directive).</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psStatusAssessment" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the Priority Substance has been used in the assessment of chemical status.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psStandardsUsed" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. For each Priority Substance indicate whether the only standards used are all the relevant ones from the version of Directive 2008/105/EC in force on 13 January 2009, except for the AA-EQS for naphthalene in transitional and coastal waters, which will be from the version of that Directive in force since 14 September 2013. If alternative or additional standards (for the same or other matrix, for particular water categories) are used for that substance reply 'No'. If all and no other standard than those in the EQSD are used reply 'Yes'. In case alternative and/or additional standards are used for a particular substance Member States are required to report all the standards used for the particular Priority Substance using the schema elements below. </xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psMatrix" type="wfd:Matrix_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Select the matrix in which the standard for the Priority Substance is applied for the purpose of assessment of chemical status. Quality checks: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psCategoryRW" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Is this standard used for the assessment of chemical status in rivers? Quality checks: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psCategoryLW" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Is this standard used for the assessment of chemical status in lakes? Quality checks: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psCategoryTW" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Is this standard used for the assessment of chemical status in transitional waters? Quality checks: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psCategoryCW" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Is this standard used for the assessment of chemical status in coastal waters? Quality checks: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psCategoryTeW" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Is this standard used for the assessment of chemical status in territorial waters? Quality checks: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psStandardType" type="wfd:EQStandardType_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional.Select the type of standard applied for each Priority Substance and matrix. ‘AA-EQS’ = Annual Average EQS.‘MAC-EQS’ = Maximum Allowable Concentration EQS.‘Both’ = Both AA and MAC EQS‘Other’ = Other type of standard Quality check: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psValue" type="wfd:String20Type" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. For every combination of Priority Substance, matrix, standard type and category, report the value or range of the standard applied. Quality checks: Conditional check: report if psStandardsUsed is 'No'.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psUnit" type="wfd:UnitOfMeasure_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Report the unit of the Priority Substance standard. Quality checks: Conditional check: report if psStandardsUsed is 'No'. Element check: Only the options  'ug/L' or 'ug/kg' are a valid selection.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psScale" type="wfd:GeographicalScale_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. Report the level at which the standard has been set.  Quality checks: Conditional check: report if psStandardsUsed is 'No'</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psAnalyticalMethod" type="wfd:YesNoCode_Enum" minOccurs="1" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Required. Indicate whether the analytical method used meets the minimum performance criteria laid down in Article 4.1 of the QA/QC Directive (2009/90/EC)  for the strictest standard applied. See Section 7.4.1 on fulfilment of the QA/QC Directive.</xs:documentation>
				</xs:annotation>
			</xs:element>
			<xs:element name="psAnalyticalMethodBAT" type="wfd:YesNoCode_Enum" minOccurs="0" maxOccurs="1">
				<xs:annotation>
					<xs:documentation>Conditional. If the analytical method does not meet the minimum performance criteria laid down in Article 4(1) of the QA/QC Directive, indicate whether the analytical method complies with the requirements laid down in Article 4.2 of the QA/QC Directive (2009/90/EC) for the strictest standard applied. Quality checks: Conditional check: Report if psAnalyticalMethod is 'No'. </xs:documentation>
				</xs:annotation>
			</xs:element>
		</xs:sequence>
	</xs:complexType>
	<xs:element name="SWMET" type="SWMET">
		<xs:annotation>
			<xs:documentation>7.REPORTING AT RBD/SUB-UNIT LEVEL FOR SURFACE WATER (SCHEMA SWMET)</xs:documentation>
		</xs:annotation>
	</xs:element>
</xs:schema>